DXO v5 unterstützt nun die D300

Thread Status
Hello, There was no answer in this thread for more than 30 days.
It can take a long time to get an up-to-date response or contact with relevant users.

heli7

Sehr aktives NF Mitglied
Registriert
Hallo,

zur Info. Die D300 wird nun von DXO unterstützt.

Leider für den Start nur ein Support von wenigen Linsen:
* AF-S DX VR Zoom-Nikkor 18-200mm f/3.5-5.6G IF-ED
* AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED
* AF-S VR Zoom-Nikkor 70-200mm f/2.8G IF-ED
* AF-S DX Zoom-Nikkor 12-24mm f/4G IF-ED
* AF-S DX Zoom-Nikkor 17-55mm f/2.8G IF-ED

Es sollen folgen: (Februar)
* AF Nikkor 50mm f/1.8D
* AF Nikkor 50mm f/1.4D
* AF-S Nikkor 24-70mm f/2.8G ED
* AF-S Nikkor 14-24mm f/2.8G ED
* AF DX Fisheye-Nikkor 10.5mm f/2.8G ED
* AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D ED
* AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED
* AF Zoom-Nikkor 70-300mm f/4-5.6D ED
* AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED
* AF-S VR Zoom-Nikkor 24-120mm f/3.5-5.6G IF-ED
* Sigma 10-20mm f/4-5.6 EX DC HSM

Please note this is a forecast only. Things MAY change
 
Anzeigen
ja, im Moment nur für Windows und das nur für 32bit.
Leider habe ich XP x64. 64bit-Unterstützung ist aber auch schon in Vorbereitung.
 
Kommentar
Nicht nachvollziebar ist für mich, dass das Tokina 12-24 nicht auf der Liste der geplanten, unterstützten Objektiven steht. :confused:
 
Kommentar
Nicht nachvollziebar ist für mich, dass das Tokina 12-24 nicht auf der Liste der geplanten, unterstützten Objektiven steht. :confused:

Kommt schon...bei meinem 85 f/1.4 hat es auch einige zeit bei der alten v4 gedauert.

Wenn sich genug beim Support mit dem Wunsch dieses Moduls melden :)

Mich ärgert es zur Zeit, das es keine MAC Version gibt und die D3 auch nicht mal angekündigt ist:motz:...jetzt sitze ich hier mit meiner alten version und mir sind die Hände gebunden :motz::motz::motz::motz:
 
Kommentar
Kommt schon...bei meinem 85 f/1.4 hat es auch einige zeit bei der alten v4 gedauert.

Wenn sich genug beim Support mit dem Wunsch dieses Moduls melden :)

Mich ärgert es zur Zeit, das es keine MAC Version gibt und die D3 auch nicht mal angekündigt ist:motz:...jetzt sitze ich hier mit meiner alten version und mir sind die Hände gebunden :motz::motz::motz::motz:

Hallo Sefa,

es bringt sicher was, wenn viele das Modul für das Tokina fordern. Ich gehe davon aus, dass es kommt. Denn das Tokina wurde und wird viel verkauft.

Das mit der D3 stimmt nicht wirklich. Die Unterstützung ist auch seit 17.01.08. für die nächste Version 5.0.4. angekündigt. Ebenso die Mac-Unterstützung.


SUPPORT FOR NIKON D3 AND CANON EOS 1DS MKIII
Work on supporting these two cameras with initial sets of lenses is now well under way. We anticipate releasing support for these two pro-level DSLRs in the February 7 to February 12 timeframe. These two DSLRs will be supported by DxO Optics Pro v5 Elite only.


NEXT VERSION OF DXO OPTICS PRO (v5.0.4)
Version 5.0.4 of DxO Optics Pro for Windows is planned to be released at the same time that we release support for the Nikon D3 and Canon EOS 1Ds MKIII (see above). DxO Optics Pro v5.0.4 will provide a number of functional and stability enhancement to version 5.0.3. DxO Optics Pro v5.0.4 may also provide some speed improvements depending on the progress of current developments.


DXO OPTICS PRO FOR MACINTOSH
Photographers using the Macintosh platform will have noticed that we have encountered important delays in the release of DxO Optics Pro v5 for the Macintosh. These delays are due to the extra time spent developing DxO Optics Pro v5 for Windows. An important number of the developers work on both platforms and have not been able to devote sufficient time to the Macintosh development until very recently. DxO Labs obviously would like to extend an apology for this delay and is now working at full speed on rectifying this situation.

Of course, our free upgrade policy remains in place for Macintosh users during the final development of DxO Optics Pro v5 for Macintosh. Any DxO Optics Pro v4.5 purchased after July 31st 2007 is entitled to a free upgrade to version 5.

Our current plans are to release a public-Beta of DxO Optics Pro v5 for Macintosh on our website in the second half of February (the current schedule is for February 20th but this can still change). The public-beta will allow Macintosh users to experience the advances of version 5 (new RAW conversion, new Noise reduction, dust & blemish removal, new interface, etc…). The public beta will also support the Canon 40D, Nikon D300 and we are hoping the Canon EOS 1D MKIII and Nikon D3 cameras. Beyond providing a preview of the final version 5 for Macintosh, the public Beta will also allow us to gather a large amount of end-user feedback before the final release. The final release date of DxO Optics Pro v5 for Macintosh will depend on the outcome of the public-beta program but is currently anticipated to be in early spring 2008.
 
Kommentar
Oppppsss....die Ankündigung hatte ich noch gar nicht gesehen ;)

Danke für den Hinweis :up:
 
Kommentar
-Anzeige-
Zurück
Oben Unten